Surface Preparation: Surface preparation of the metal is crucial in the construction of ceramic tile linings, directly affecting the quality of the lining. When using sandblasting for rust removal, the following parameters should be controlled: blasting angle: 30-70 degrees; minimum air pressure: not less than 0.5 MPa; grade requirement: Sa2.5; no visible residue on the surface, exhibiting a uniform metallic color.
Priming: After sandblasting, clean off oil stains with solvents such as gasoline. To prevent further rusting, immediately apply a coat of epoxy primer, ensuring even application and avoiding any missed areas. Allow at least 8 hours after applying the primer to allow the solvent to fully evaporate and cure completely (the inner surface of the equipment should be smooth, flat, and wrinkle-free). 12 hours after applying the epoxy primer, apply a coat of phenolic FRP release liner, curing for 8 hours; apply a second coat of phenolic FRP release liner, curing for 8 hours.
Porcelain Tile Installation
Preparation of Siliceous Acid-Resistant Mortar: The ratio of water glass to powder in the siliceous acid-resistant mortar is 1:2.5. Mix the water glass and powder evenly according to the ratio to prepare the siliceous acid-resistant mortar.
Pre-arrange the porcelain tiles on the lining surface. If any tiles are unsuitable, they should be replaced first.
Apply the prepared siliceous acid-resistant mortar as a base coat, then apply a layer of type B (double groove) mortar, followed by a layer of porcelain tiles. Apply using the grouting method, with a joint width of approximately 3mm. Allow to cure for 12 hours.
Apply a layer of type A (single groove) porcelain tiles using the prepared siliceous acid-resistant mortar, grouting at a joint width of 2-3mm. Allow to cure for 12 hours.
Acidification Treatment: After drying in a greenhouse for 2-3 days, perform acidification treatment three times with 38% sulfuric acid. After each treatment, wipe off the white precipitate with a dry cloth before applying the acid treatment.
