Chemical Defense Through Raw Material Formulation: The "armor" of acid-resistant bricks is forged from the selection of raw materials. Using clay with a silicon content exceeding 70%, combined with quartz sand and feldspar, a glassy substance is formed at high temperatures. This substance, like bulletproof glass, makes it difficult for hydrogen ions to penetrate its tight SiO₂ network structure. Simultaneously added alumina forms a protective oxide film upon contact with acid, acting like an invisible protective layer on the brick.
Physical Barrier of Crystal Structure: After sintering at temperatures above 1200℃, the raw materials undergo a remarkable transformation: quartz transforms into cristobalite crystals, and clay recrystallizes into mullite. These crystals act like a tightly packed shield, allowing acid to only "slip" on their surface. Experiments show that high-quality acid-resistant bricks have a water absorption rate of less than 0.5% and a porosity of less than 3%, this "impregnable" structure leaving no opening for acidic substances.
Enhanced Design of Surface Treatment: Modern acid-resistant bricks often employ glazing or impregnation treatments. The zirconium in the glaze reacts with acid to form inert salts, like giving the brick a 'self-healing coating'. The vacuum impregnation process fills the micropores with silicone solution, forming a hydrophobic network inside the brick. With this double protection, even 98% concentrated sulfuric acid is difficult to penetrate.
