Preparation before installation: Installing ceramic rings is like building with blocks; a solid foundation is essential for stability. First, check that all accessories are complete: Ceramic rings, filter tank, and filter cotton are all necessary. Rinse the ceramic rings with clean water to remove surface dust, but avoid using detergents to prevent chemical residues from affecting water quality. Plan the placement method according to the size of the filter tank; vertical or horizontal placement each has its advantages, with vertical placement facilitating more even water flow.
Ceramic Ring Installation Tips:
Lay out layers: First, lay filter cotton at the bottom, then ceramic rings in the middle, and finally add another layer of fine filter cotton on top, forming a sandwich structure.
Leave gaps: Leave a 1-2 mm gap between the ceramic rings, like building a highway for water flow to prevent clogging.
Water flow direction: Ensure that water flows through the physical filtration layer before contacting the ceramic rings; directly rinsing with dirty water will shorten their lifespan.
Precautions during use: Newly installed ceramic rings need 1-2 weeks to "cure" and allow a biofilm to gradually form on the surface for them to be effective. Check monthly for broken rings and replace any damaged parts promptly. When cleaning, take a portion of the rings and gently rinse them with water from the original tank. Do not clean all of them at once, as this will disrupt the established ecological balance. If the water turns white and cloudy, it may indicate an imbalance in the bacterial flora; reducing feeding and increasing aeration should restore balance.
